The Shells by the Sea Leggings features a signature color collection hand painted using a wet watercolor paint brush to create a beautiful beach inspired pattern. Designed with knit performance fabrication, the Shells by the Sea Leggings is silky, lightweight, opaque with a subtle satin sheen.
This is the legging you cannot live without. Featuring a classic silhouette and buttery soft fabric that's perfect for every occasion. Wear this from studio-to-street, barre-to-brunch and even bedroom to bedroom again... you'll never want to take them off.
82% Nylon, 18% Spandex
Quick Dry moisture wicking
4-way stretch high performance
Flat seam and coverstitch
38-40 UPF (Ultraviolet Protection Factor)
XS: 0-2 Waist 25” Hips 35” Inseam 27”
S: 2-6 Waist 27” Hips 37” Inseam 27.5”
M: 6-10 Waist 29” Hips 39” Inseam 28”
L: 10-14 Waist 32” Hips 42” Inseam 29”
XL: 14-16 Waist 35” Hips 45” Inseam 30”
3” Raised waistband sits at natural waist.
Wash inside out in cold water
Hang or lay flat to dry
Do not iron.
Athleisure Wear Measurements
Use a tape measure to measure yourself, holding the tape securely around the 5 key points. To achieve an accurate measurement we recommend you take these measurements whilst wearing no clothing.
BUST: Measure around your chest at the fullest point of bust. Make sure measuring tape is relaxed and not tight. Please wear unpadded bra while measuring. Find your bust measurement above and pair with cup size to find your size.
UNDER-BUST: Measure directly under your bust and straight around your back.
WAIST: Bend to one side to find your natural indentation in torso. This is your natural waist. Run the tape around your natural waistline, keep tape parallel to the floor and one finger in between body and tape for a more comfortable fit.
HIP: Measure around the fullest part of hips (approximately 7”-9” below waistline), keeping tape parallel to the floor.
INSEAM: From the inside of your leg at the crotch to the floor.
Flat Tee Measurements
T-shirts are measured flat across one side. Place your favorite tee on a flat surface and measure as follows:
WIDTH: Measure straight across from one side to the opposite side.
LENGTH:Measure straight down from the top to the bottom.
SLEEVE: Length Measure from the seam at the shoulder to the end of the sleeve.
Refer to the table on the product page to confirm your correct size.
We make every effort to provide the most current size charts from our vendors in our sizing system. Please contact us if you have any questions before ordering.